Skip to content

MCQ on Inductance

MCQ on Inductance

Q1: Mutual inductance between two magnetically coupled coils depends on

  1. Permeability of the core material
  2. Number of turns of the coils
  3. The cross-sectional area of their common core
  4. All of the above

Answer: (d) All of the above

Q2: What will be the inductance if the iron core is removed from the iron cored coil to make it air-cored coil?

  1. More
  2. Less
  3. The same
  4. None

Answer: (b) Less

Q3: Higher the self-inductance of a coil

  1. Lesser its weber-turns
  2. Emf induced is low
  3. Greater the flux produced
  4. Longer the delay in establishing a steady current through it

Answer: (d) Longer the delay in establishing a steady current through it

Q4: Which of the following circuit elements will oppose the change in circuit current?

  1. Capacitance
  2. Inductance
  3. Resistance
  4. All of the above

Answer: (b) Inductance

Q5: How does an inductor work?

  1. Storing energy as a magnetic field.
  2. A wire piece is charged
  3. Introducing resistance into a circuit
  4. Choking off high-frequency ac

Answer:(a) Storing energy as a magnetic field.

Q6: The inductance of the coil is not affected by which of the following?

  1. The length of the coil
  2. Number of turns
  3. The material of the core
  4. The diameter of the wire

.Answer: (d) The diameter of the wire.

Q7: In a small inductance:

  1. Large current flow
  2. Energy is stored and released quickly
  3. Small current flow
  4. Energy is stored and released slowly

Answer: (b) Energy is stored and released quickly

Q8: The phenomenon due to which there is an induced current in one coil due to the current in a neighbouring coil is?

  1. Mutual inductance
  2. Steady current
  3. Electromagnetism
  4. Susceptance

Answer: (a) Mutual inductance

Q9: The combination of the same two inductors (33 mH and 55 mH) connected in parallel without mutual inductance will have a value of

  1. 22 mH
  2. 88 mH
  3. 1.8 H
  4. 21 mH

Answer: (b) 88 mH.

Q10: Three inductance with the values 4 NH, 140 μH, and 5 H are connected in series without mutual inductance. For practical purposes, the net inductance will be very close to

  1. 4 NH
  2. 140 μH
  3. 5 H
  4. None of these

Answer: (c) 5 H

 

Cart
Back To Top
error: Content is protected !!